Posts mit dem Label Home Lab werden angezeigt. Alle Posts anzeigen
Posts mit dem Label Home Lab werden angezeigt. Alle Posts anzeigen

Mittwoch, 19. September 2012

vSphere 5.1 Lab – Initial Setup


With the release of vSphere 5.1 now, and some of the new features, I decided to dedicate a new series of posts just to 5.1, and install it all in my lab environment – from the ground up.
First off – this is a clean slate – I won’t be doing any upgrades – everything will be a fresh install.
Hardware:
HP ML330 G6
  • 1 Xeon E5504 Quad Core
  • 64 GB RAM
  • 8x 300 GB SAS 15k in Raid 5
Since I am using a single server, I will be running mutiple nested ESXi servers. (See previous post – Creating a Nested ESXi 5 Environment)
Now onto the install:
Install ESXi 5.1:
This really is self explanatory anymore.  Insert CD, pres enter and F11 a couple of times – and you are good to go.  I did use the HP Customized image, since this is a HP server.
Prepare for Nested ESXi:
The steps are the same as with 5.0.
  • echo ‘vhv.allow = “true” ‘ >> /etc/vmware/config
  • Enable promiscuous mode on vswitch

Mittwoch, 8. August 2012

Your home lab costs too much electricity?


ust found out my electricity bill is going up by 19% and its already stupidly high as it is. So I decided to save my own pocket to go green in what way I can. So #1 of course I’ve got my home vSphere cluster properly configured to keep off one of my servers switched off most of the time using DPM. However I want to save more energy so I had an idea about my desktop PC. Like most IT geeks I leave my home desktop PC switched on 24/7  for convenience, to have access whatever the reason I like to have it on.  I started to  think is there a way I can control my desktop PC like DPM and came up with this idea: I would schedule a task to place my PC into sleep mode at 2am and then schedule a Wake Up Lan task to power it on in its previous state at 7am thus saving me 5 hours of electricity. So this is how I did it:
Step1 I used the windows scheduler to schedule this command at 2am:
Click to make larger
This places my PC in a sleep state.
 Step 2. I run the DD-WRT firmware on my home router (DD-WRT is configurable on tons of routers) and one of the things it can do is schedule through a cron job a wake up lan call (WOL) . Below is the command I used to wake up using my PC from its MAC address at 7:03am:
Click to make larger
Job done..
Popularity: 4% [?]

Rename Onedrive Business root folder

Rename Onedrive Business root folder Here is what I remember: In the Office 365 web admin pages, change the organization name to a shorte...