Posts mit dem Label SBS 2003 werden angezeigt. Alle Posts anzeigen
Posts mit dem Label SBS 2003 werden angezeigt. Alle Posts anzeigen

Freitag, 24. April 2015

DISABLING SBCORE SERVICE – SBS SHUTDOWN EVERY HOUR

With a few SBS 2003 to 2008 migrations going over the 21 day limit (unfortunately due to third party support on line-of-business applications) we found it necessary to use the below to stop the SBS 2003 server shutting down every hour. I do not recommend this or support this as it is in breach of Microsofts EULA – however in some scenario’s it may be critical to ensure a smooth decommissioning of the old SBS 2003 server.
The below is the error log you should see:
Event ID: 1001
Type: Error
Source: SBCore
Description:
The server was shut down because it did not comply with the EULA. For more information, contact Microsoft.
To disable we followed the below:
  1. Download the Process Explorer tool from SysInternals – Here
  2. Load Process Explorer and look for the SBS Licensing Service – C:\Windows\system32\sbscrexe.exe
  3. Select this service and Suspend it – you should find the service greys out
  4. Open Regedit and expand the following key – HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SBCore
  5. Right click this Key and add the Administrators group giving them Full Permission to the key (refresh this and you should see all the key entries now)
  6. Select the Start DWORD and change it from 2 to 4 (this sets the Disabled state)
  7. Open a File Explorer window and browse to the C:\Windows\system32\sbscrexe.exe file
  8. Right click this and load Properties / Security
  9. Add the Everyone group and set the Deny permission for Full Access (should then tick the sub permissions)
  10. Go back to Process Explorer and now kill the sbscrexe.exe service – this should now be disabled
  11. Check the SBCore service via services.msc – it should have a disabled state and now longer be running
  12. Job Done.

Sonntag, 22. Juli 2012

Activation Loop After Completing the SBS 2003 Transition Pack


We've seen a few cases now where a server is in an activation loop (activation never completes successfully and you are continually prompted to activate on reboot) after either:

Upgrading via the SBS Transition Pack
Upgrading from Windows Server 2003 Standard Edition to SBS 2003 or
From Evaluation Version SBS 2003 to Full Package Product (FPP) SBS 2003.
All of these scenarios have identical symptoms.  The behavior is as follows:

The Windows setup process completes and after the last reboot when you try to login
You receive a prompt requesting to activate the server to be able to continue.
You will get the following error:


When you click YES, nothing happens and you are thrown back to the Windows logon screen (press ctrl-alt-del to logon).

** This is very important to note, the activation wizard NEVER starts up. **

If you check the Application log of the server (from Safe Mode or from a remote machine) you will see an event similar to this one:



Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 1/24/2007
Time: 12:26:28 PM
User: N/A
Computer: SERVER
Description:
Faulting application msoobe.exe, version 5.2.3790.0, faulting module urlmon.dll,
version 6.0.3790.2612, fault address 0x0000618c.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 6d 73 6f ure mso
0018: 6f 62 65 2e 65 78 65 20 obe.exe
0020: 35 2e 32 2e 33 37 39 30 5.2.3790
0028: 2e 30 20 69 6e 20 75 72 .0 in ur
0030: 6c 6d 6f 6e 2e 64 6c 6c lmon.dll
0038: 20 36 2e 30 2e 33 37 39 6.0.379
0040: 30 2e 32 36 31 32 20 61 0.2612 a
0048: 74 20 6f 66 66 73 65 74 t offset
0050: 20 30 30 30 30 36 31 38 0000618
0058: 63 c

This issue can happen if the server has Internet Explorer 7 installed BEFORE installing the Transition Pack or before completing any of the other described scenarios.

The process is really completing correctly, but the activation wizard cannot start due to mismatched IE files.

If you are already having this problem, and In order to get out of this behavior and be able to start the activation wizard to properly activate the server you need to do the following:

1. Boot -up into Safe Mode

            a. While hard drive with SBS is booting up hold down F8

            b. Select first option “Safe Mode”

2. Logon as Administrator

3. Dismiss “Windows is running in Safe Mode” prompt

4. Click Start, Click Run , Type  

%systemdrive%\Windows\IE7\spuninst\spuninst.exe

5. You should see a wizard with “Windows Internet Explorer 7 Removal Wizard” in the

title

6. Click Next on wizard

7. Click Finish to reboot on wizard

8. Let SBS boot up normally and logon as administrator

9. On prompt saying that you must activate to continue to log on

1. Click “Yes”

2. Activation wizard will pop-up

10. Run Activation Wizard to activate the box

11. SBS Transition Pack Wizard will continue to run and let it reboot machine

12. Logon as administrator.

13. Click Finish on SBS Transition Pack Wizard

14. Re-Install IE7 from the Web (http://www.microsoft.com/ie)

Note:

If you encounter an issue where the server is in an activation loop but the activation wizard does start (it just fails to complete the activation), make sure the Transition Pack has actually completed or you might be seeing the behavior described in:

914990  Installation of the Windows SBS 2003 Transition Pack may silently fail on a Windows SBS 2003-based computer

http://support.microsoft.com/default.aspx?scid=kb;EN-US;914990

If you are planning to install the Transition Pack, make sure that IE7 is uninstalled prior to starting the process.

Also check the following post for other things to check prior to installation:

http://blogs.technet.com/sbs/archive/2006/01/12/417350.aspx

Donnerstag, 29. Juli 2010

SBS2003 ersetzen mit einem 2008 + Exchange 2010.

Füge den 2008er Server der Domain als Member hinzu.
Treffe die Vorbereitungen auf dem SBS mittels dem 2008er (32bit) adprep.
Dann stufe den 2008 zum weiteren DC in der SBS Domain hoch, kontrolliere welchen Modus die SBS Domain hat.
Hebe den AD ForestLevel auf 2003 an.
Installiere den Exchange 2010, richte diesen ein, verschiebe die Postfächer vom 2003 auf den 2010, öffentlicher Ordner dito.

Warte einen Tag ab, deinstalliere den Exchange 2003, übertrage die 5 Rollen auf den 2008,
denke an den Wins, richte den auch auf dem 2008 ein. Dann kontrollierst du die Events auf den
Servern, demote den SBS und entferne diesen aus der Domain.


Oder etwas genauer beschrieben:

1. Add the new 2008 server as a member server in the existing SBS 2003
domain.
2. Run adprep on the SBS to update the AD schema.
3. Add Domain Controller to current domain
4. Add Exchange server to the current domain.
5. Add Security Server to current domain
6. Promote 2008 DC to domain controller in current domain.
7. Install .NET 1.0
8. Install ExPRA
9. Run Exchange best practices analyzer
10. ServerManagerCmd -i powershell
11. ServerManagerCmd -i RSAT-ADDS
12. Install IIS, and compatibility add-ons for new exchange server
13. Transition mailboxes to the new server.
14. Transition FSMO roles from SBS 2003 to 2008 server including naming
master
15. Redirect Inbound Mail to the Exchange 2007 server
16. Move public folders the Exchange 2007 server
17. Migrate DNS server
18. Finalize Exchange Server Migration
19. Move a CA to a Different Computer
20. Change login scripts
21. Move group policies etc. to 2008 server.
22. Change the domain controller that Exchange 2007 connects to
23. Remove SBS 2003 server from domain.

When we tried to migrate into EBS, we had a few different issues. All of
which prevented the initial setup of EBS. The first error occurred on the
management server, the second issue on the messaging server. They were fatal
errors that prevented the initial setup from completing. I do not remember
them exactly, but only remember it would not even setup correctly. Also, I do
not know what you are talking about, so it must not have been me. I am in TX.
It is ok about the EBS thing though. I have just successfully migrated the
SBS 2003 domain to a 2008 Standard domain and have all emails, and public
folders..... Woo Hoo!!!


Donnerstag, 17. Juni 2010

SBS Migrations Assistent startet nicht - Fehlermeldung

nach unzähligen Migrations-Szenarien SBS 2003 -> SBS 2008 stehe ich nun vor einem Problem und ich weiß auch nicht mehr so recht wo ich suchen soll.

Es soll ein SBS 2003 (x86) durch einen SBS 2008 ersetzt werden inkl. Migration.

Die Installation wurde nach dem Migrationshandbuch durchgeführt, alles lief wie immer ohne Zwischenfälle.

Der neue Server hat auch die AD-Rollen übernommen, DNS habe ich auch schon auf den neuen geschoben, auch DHCP ist auf dem neuen Server.

Das Problem: Wenn ich nun den Migrations-Assistenten ausführen will kommt die Meldung: "Der Migrations-Assistent unterstützt nur die Migration von Windows Small Business Server. Weitere Informationen, sowie unterstützte Versionen und Mindestanforderungen finden Sie im Migrationshandbuch."

Ich habe im Migrationshandbuch keine Hinweise gefunden, auch im Internet hat scheinbar noch niemand dieses Problem gehabt.


Lösung:

Am die Eigenschaft in der %PROGRAMFILES%\Windows Small Business\Server\Data\info.xml Datei überprüfen?

Diese sollte den Wert "Sbs2003" enthalten. Falls diese den Wert "Other" enthält, bitte die info.xml Datei sichern und die Einstellung mit dem "Sbs2003" Wert (Case Sensitive) anpassen.

Rename Onedrive Business root folder

Rename Onedrive Business root folder Here is what I remember: In the Office 365 web admin pages, change the organization name to a shorte...