This is the process to add a new Unifi AP or Switch to the Unifi controller when discovery doesn’t work. In our case, we have a central Unifi controller managing APs or Switch on multiple networks. But, the routers don’t allow the discovery tool to see new APs on other networks, so this is how we add one. In this example, we’ll say the Unifi controller is at 192.168.8.9.
1) Write down (or take a picture on your phone) the MAC address for the new Device
2) Connect the new Unifi AP or Switch
3) Check DHCP or IP Scanner to see what IP address was given to the Unifi Device.
Once you have the IP, we’ll use putty to ssh into the device. In this example, we’ll use 192.168.10.40.
start putty01
NOTE: If the Device has been provisioned before, you’ll have to use the password for the Unifi controller it was provisioned by.
login as: ubnt
password: ubnt
NOTE: If the Device has been provisioned before, you’ll have to reset it to factory defaults. to do that, use the following command, and then SSH back into the device when it comes back up.
> syswrapper.sh restore-default
Aften than update the Firmware on your device
> upgrade "FW url"
Example:
> upgrade http://dl.ubnt.com/unifi/firmware/US24P250/3.9.42.9152/US.bcm5334x.v3.9.42.9152.180709.2252.bin
Since this is a brand new Device for us, we just need to do this:
> set-inform http://192.168.8.9:8080/inform
Next, we go connect to the Unifi command center. In a few minutes, we should see an alert stating a new device has checked in. If you don’t see the alert, check the device list, it should show up there as “Unknown”. From either location (alerts or ap device list), you should have a button that says “Adopt”. Adopt the new AP and go back to the SSH shell.
Send the command again, this should allow the AP to see that it has been adopted.
> set-inform http://192.168.1.55:8080/inform
Now you should see the new AP provisioned in the Unifi controller and you can edit the name and update the AP firmware.
Best of Blogs. In meinen Blog veröffentliche alle Lösungen für Probleme mit denen ich selbst zu tun gehabt habe. Die meisten Beiträge sind von anderen Blogs oder Webseiten kopiert.
Dienstag, 14. August 2018
Windows Domain Controller: Es sind momentan keine Anmeldeserver zum Verarbeiten der Anmeldeanforderung verfügbar
Zurzeit häuft sich (warum auch immer) das Problem dass nach einem Neustart eines Windows Domain Controllers bei der Anmeldung die Fehlermeldung „Es sind momentan keine Anmeldeserver zum Verarbeiten der Anmeldeanforderung verfügbar“ kommt und eine Anmeldung so nicht möglich ist
Das Problem ist hierbei das der Domain Controller im Active Directory Reperatur Modus (Abgesicherter Modus) startet.
Am einfachsten lässt sich dieses Problem folgendermaßen beheben:
1) Anmeldung mit dem DSRM (Directory Services Restore Mode) / Verzeichnisdienstwiederherstellungskennwort
Falls die Anmeldung nicht funktioniert kann man einen Workaround wie hier beschrieben durchführen.
2) Systemkonfiguration mittels msconfig.exe aufrufen
und unter Start den Haken bei Abgesicherter Modus entfernen und mittels Übernehmen bestätigen
3) neustarten und sich ganz normal wieder mit dem Domänen-Administrator anmelden.
Dienstag, 17. Juli 2018
Unfi Ubiquiti USG4_PRO Restart every 12-24 hours
you can download 4.4.26dev firmware from this link: https://dl.ubnt-ut.com/usg/USGPro-upgrade-v4.4.26dev.5104476.180711.1503.tar
Montag, 9. Juli 2018
Gemalpto Smart Card Reader only appears as "Shared" not "Passthrough"
you can manually enable passthrough mode. The reason why the passthrough mode was disabled was because we were stepping toes with a service called pcscd service that is required for the shared mode to work. However if you do not want to use the shared mode, you can manually disable shared mode and enable the passthrough mode
Here are the steps:
Shutdown the VM to which you want to passthrough the smart card and:
1) Go to the VM's installation directory. Typically C:\Users\<username>\Documents\Virtual Machines\
2) Open <virtual-machine-name>.vmx file
3) Append the following lines:
usb.generic.allowCCID = "TRUE"
usb.ccid.disable = "TRUE"
4) Kill the process corresponding to the PCSC daemon on the Linux host
Do a # ps -ef | grep -i pcsc on your Linux host
sudo kill -9 <pid of the process that corresponds to pcscd>
Notes:
1) The first line in step 3 enables the passthrough mode
2) The second line in step 3 disables shared mode
3) Since you are killing the pcscd on your host, you wont be able to use the smart card on the host. You can passthrough the smart card now and use it in the VM
Hope this helps,
Montag, 11. Juni 2018
Spectre and Meltdown Patches for HP Client, PCs, Notebooks and Worstations
HP url: https://support.hp.com/sg-en/document/c05869091
Sonntag, 10. Juni 2018
WinStoreUI.admx-Konflikt beim zentralen Speicher mit Windows 10 Version 1511 ADMX-Dateien aktualisieren
Link: https://support.microsoft.com/de-at/help/3190327/winstoreui-admx-conflict-when-central-store-is-updated-with-windows-10
How to configure Microsoft Edge Settings Using Group Policy?
With the release of Windows 10, Microsoft also introduced its new default web-browser Microsoft Edge. Let’s try to figure out whether it is possible to centrally manage Microsoft Edge Group Policy settings in the enterprise environment.
If you open the Local Group Policy Editor console (gpedit.msc) on Windows 10 RTM, then under section Computer Configuration -> Administrative Template -> Windows Components -> Microsoft Edge (and User Settings -> Administrative Template -> Windows Components -> Microsoft Edge) you can find 10 different Group Policy settings (quite a small amount comparing to almost 1500 different GPO settings for Internet Explorer browser). The following policies are available to manage Microsoft Edge settings:
- Allows you to run scripts, like Javascript
- Allows you to let people use autofill on websites
- Allows you to let people send Do Not Track headers
- Allows you to configured password manager
- Allows you to run pop-ups
- Stops address bar from showing search suggestions
- Allows you to configure SmartScreen
- Configure how Microsoft Edge treats cookies
- Allows you to configured the Enterprise Site list
- Sends all intranet traffic over to Internet Explorer

Samstag, 9. Juni 2018
How To Activate Windows 10 / Server 2016 Through Command Line
If you are having problems activating Windows 10, Server 2016, Windows 8, or Server 2012 one of these three solutions below should get you through:
Command Line to Launch Activation GUI:
This is handy if the GUI won’t start and you want to skip some steps to get it to work.
- click START (gets you to the tiles)
- type RUN
- type slui 3 and press ENTER
- yes, SLUI: which stands for SOFTWARE LICENSING USER INTERFACE
- SLUI 1 brings up the activation status window
- SLUI 2 brings up the activation window
- SLUI 3 brings up the CHANGE PRODUCT KEY window
- SLUI 4 brings up the CALL MICROSOFT & MANUALLY ACTIVATE window
- yes, SLUI: which stands for SOFTWARE LICENSING USER INTERFACE
- Type in your product key
- Have a nice day.
Command Line to Activate Windows Through Command Line:
- Launch a CMD as an Administrator
- Type: slmgr.vbs /ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
- Press Enter
If your key is valid and you are connected to the internet, it should activate within a second or two.
Call Microsoft Activation Center:
In Canada and the US, call the support line directly at 1 800-936-4900, otherwise, use this table of Microsoft Activation Phone Numbers to do the deed
Sonntag, 4. März 2018
Latest HPE ILO firmware
Here you can download the most recent HP iLO (Integrated Lights-Out) firmware files
UPDATE - 04.03.2018
ILO1 : ilo196.bin (30-Apr-2014)
ILO2 : ilo2_232.bin (18-Feb-2018)
ILO3 : ilo3_189.bin (iLO3 v 1.89.2 07-Jul-2017)
ILO4 : ilo4_255.bin (iLO4 v 2.55.10 16-Aug-2017)
ILO5 : ilo5_120.bin (9-Feb-2018)
extract .bin files from these links.
Old versions:
ILO1:
ilo187.bin
ilo188.bin
ilo189.bin
ilo191.bin
ilo192.bin
ilo193.bin
ilo194.bin
ilo195.bin
ILO2:
ilo2_120.bin
ilo2_122.bin
ilo2_124.bin
ilo2_126.bin
ilo2_129.bin
ilo2_130.bin
ilo2_135.bin
ilo2_140.bin
ilo2_142.bin
ilo2_143.bin
ilo2_150.bin
ilo2_160.bin
ilo2_161.bin
ilo2_170.bin
ilo2_175.bin
ilo2_177.bin
ilo2_178.bin
ilo2_179.bin
ilo2_180.bin
ilo2_181.bin
ilo2_182.bin
ilo2_183.bin
ilo2_201.bin
ilo2_205.bin
ilo2_206.bin
ilo2_207.bin
ilo2_208.bin
ilo2_209.bin
ilo2_212.bin
ilo2_213.bin
ilo2_215.bin
ilo2_220.bin
ilo2_222.bin
ilo2_223.bin
ilo2_225.bin
ilo2_227.bin
ilo2_228.bin
ilo2_229.bin
ilo2_230.bin
ilo2_231.bin
ILO3:
ilo3_187.bin
ilo3_100.bin
ilo3_105.bin
ilo3_110.bin
ilo3_115.bin
ilo3_116.bin
ilo3_120.bin
ilo3_126.bin
ilo3_128.bin
ilo3_150.bin
ilo3_155.bin
ilo3_157.bin
ilo3_161.bin
ilo3_165.bin
ilo3_170.bin
ilo3_180.bin
ilo3_182.bin
ilo3_185.bin
ilo3_187.bin
ilo3_188.bin
ILO4:
ilo4_101.bin
ilo4_105.bin
ilo4_110.bin
ilo4_113.bin
ilo4_120.bin
ilo4_122.bin
ilo4_130.bin
ilo4_132.bin
ilo4_140.bin
ilo4_150.bin
ilo4_151.bin
ilo4_153.bin
ilo4_200.bin
ilo4_202.bin
ilo4_203.bin
ilo4_210.bin
ilo4_211.bin
ilo4_220.bin
ilo4_222.bin
ilo4_230.bin
ilo4_231.bin
ilo4_240.bin
ilo4_242.bin
ilo4_244.bin
ilo4_250.bin
ilo4_253.bin
ilo4_254.bin
ILO5:
ilo5_117.bin
Samstag, 20. Januar 2018
Workaround für Fehler 0x8007003B beim Anlegen eines Ordners auf einem Netzlaufwerk - Windows 10
CMD ausführen als Administrator
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc.exe config mrxsmb20 start= disabled
PC neu gestartet und der Fehler war beseitigt.
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc.exe config mrxsmb20 start= disabled
PC neu gestartet und der Fehler war beseitigt.
Sonntag, 12. November 2017
Enable SNMP on vmware 5.5 ESXi
Trying to start snmpd on vmware from where i get the following error:
Call "HostServiceSystem.Start" for object "serviceSystem" on ESXi "10.0.0.5" failed.
Turns out that more people are having this problem on ESXi, but there is an easy fix.
ssh into your server and run:
esxcli system snmp set --communities public
esxcli system snmp set --enable true
/etc/init.d/snmpd restart
More info i found here: http://everythingshouldbevirtual.com/vsphere-5-5-enable-snmp
Abonnieren
Posts (Atom)
Rename Onedrive Business root folder
Rename Onedrive Business root folder Here is what I remember: In the Office 365 web admin pages, change the organization name to a shorte...
-
One of the visitors of this blog asked the question if we could publish a list of recommended post Windows Server 2008 R2 SP1 hotfixes rela...
-
With your Windows Network working and a number of resources shared, you can install the TCP/IP Protocol to allow your Windows for Workgrou...



